BACK TO TOP

VENEERED WOOD GRILL

The Veneered Wooden Grill system consists of wooden slats that are secured to each other with an aluminum dowel. These assembled slats form the grill panel, which can be produced in various lengths and widths. A wide range of wood veneers is available, all with their own characteristics. The system is easy to install and allows the ceiling to be demountable and provides easy access to the plenum. Due to the freedom of choosing your own grill dimensions, a unique ceiling or wall can be created.

General Information

Why Veneered Wood Grill?

Veneered Wood Grills are an environmental friendly building product with endless possibilities. The wood is used efficiently in the production of veneer, as modern production methods ensure that around 800-1000 m2 of veneer can be produced from 1 m3 of wood. The advantage of the system is that it is a made-to-measure solution, meaning no cutting adjustments are required at site, significantly reducing the installation time and cost.

Characteristics

  • Made to measure solutions, produced as per project dimensions and requirements
  • Possibility to use large grills up to 150mm height, other sizes upon request
  • High acoustic performance with or without rock wool
  • Reaction to fire classification B-s2,d0 according to EN 13501-1, other classifications upon request
  • Budget and design flexibility due to freedom in slat size and gap
  • An all-natural and sustainable wooden ceilings solution with FSC/PEFC certification

Application

The Veneered Wood Exterior ceilings are suitable for all building sectors: Corperate, Transport (airports, metro bus, train stations), Retail, Leisure, Public space, Hospitality, Healthcare, Education or Residential.

American Cherry

American Walnut

American White Oak

American Maple

Anigre

Ash

Bamboo

Beech

Birch

Cedar

European Oak

Hemlock

Koto

Pine

Red Oak

Spruce

Sycamore

Teak

Wall fixation

The Veneered Wood Grills allow the designers to decide the grill dimension. The height of the grill slats is between 40 - 150mm, and the width between 17 - 32mm. The gap can be any size, but a common rule of thumb is that the gap between the slats does not exceed the slat height. The maximum length of the slat is 2780mm. Of course, other dimensions are available upon request. 

Optionally, the metal dowel can be replaced with a wooden backer, or a flexible dowel to created curved grills.

Wall Solution
The installation of the Veneered Wood Grill wall panels is easily done, by clicking the dowel into the wall clips, which are mounted on a substructure or wall. The grills can be installed horizontally or vertically. 

- Quick installation with the dowel that snaps onto the wall clips
- Installation in horizontal and vertical direction possible
- Slat size is fully customizable

Acoustic performance
Acoustical comfort in an office space, school or public building contributes to our well-being as good acoustic comfort can positively affect health, communication, safety, productivity and learning. 

Playing with the panel width and gap will, can provide the necessary acoustic performance for different atmospheres. Optionally, the panels can also be perforated.

Reaction to fire
By impregnating wood, a reaction to fire classification (EN13501-1) of B-s2,d0 can be achieved. In some cases higher classifications can also be achieved.

High humidity solutions
Due to a special treatment to the wooden panels, some wood species are perfectly suitable for humid areas, such as swimming pools.

NAME
DOWNLOAD
Interior Veneered Wood Grill Ceiling 2D - Grill

Interior Veneered Wood Grill Ceiling 2D - Elements

Interior Veneered Wood Grill Ceiling 2D - Application

NAME
DOWNLOAD
Interior Veneered Wood Grill Ceiling 2D - Grill

Interior Veneered Wood Grill Ceiling 2D - Elements

Interior Veneered Wood Grill Ceiling 2D - Application

Health and wellbeing

Hunter Douglas contributes to sustainable buildings through aesthetic solutions that enhance comfort and save energy. Promoting health and wellbeing of their occupants is arguably the most important function of buildings. Buildings are not constructed just to be energy efficient. Our shading solutions promote the use of healthy daylight without the hindrances of glare and thermal discomfort. Our acoustic ceilings are a key element in the provision of acoustic comfort.

Sound materials

Environmentally sound materials are key to sustainable buildings. Our strategy is to pick materials that have good environmental properties to start with. Many of our products are made of aluminum produced in our own smelters. We’ve optimized our processes to use up to 99% of recycled content to produce the right alloy for our products. Our wood is FSC certified and we embrace the Cradle to Cradle principle in our product development.

Energy savings

Reducing the energy use of the total building stock is key to the prevention of global warming. Most modern office buildings use more energy for cooling than heating. Effectively managing the solar energy that passes through the transparent part of the façade is a key strategy in the prevention of overheating in both old and new buildings. Our high performance shading solutions bring substantial energy savings, while at the same time promoting health and wellbeing.

Corporate Social Responsibility

Keen on Green is an important company-wide initiative to reduce energy consumption, water usage and our overall carbon-footprint. We embrace the ISO 14001 framework to actively manage our Keen on Green objectives. Hunter Douglas and its employees actively support the communities in which we live and work, as well as those on a more global scale. Business is people. We pride ourselves on our worldwide network of experienced, intelligent, passionate and creative people that have consciously chosen Hunter Douglas as their employer.

Health and wellbeing

Sound materials

Energy savings

Corporate Social Responsibility

NAME
DOWNLOAD
Brochure Grill Veneered

Commercial Ceilings & Walls Product Guide